CXBG-1-1-PS-A-FS-PSD-HP16

Model:FS-PSD-HP16

Product Details

Implementation standard: GA/T1202-2022 "General Technical Conditions for Traffic Technology Monitoring imaging Fill light Device".

Power self-check function: automatically judge the working state, and determine whether the camera output signal is normal through the number of flashes.

Support camera error trigger protection function, automatic protection and automatic recovery when trigger signal input is abnormal.

Wide voltage input automatic adaptation: Input different voltage lamps within the safe range can work normally, and will not cause the brightness of the lamp to change due to the voltage drop generated during the line transmission process.

Intelligent control: accurately control the brightness of the light source, can accurately control the stroboscopic pulse width, flash time, trigger signal and other parameters through the software setting function, through the field debugging, so that the camera can achieve the best shooting effect that ordinary lamps can not achieve.

Support stroboscopic/brightening capture function: the product adopts the digital control circuit design independently developed by the company, with automatic detection of camera frequency and exposure time, built-in algorithm automatically synchronizes (frequency doubling) camera frequency, exposure time can be controlled by the camera or manually; Automatically match the camera switching signal (rising, falling edge), level signal (high, low level); LED selection of high color rendering makes the shooting picture color real. Synchronize with the camera shutter to achieve high-frequency instant highlighting, in the night without other ambient light, with high-definition cameras to capture clear license plates, the body, the driver in the car and the surrounding environment and other elements.

Anti-glare: the luminous body composed of multiple LED arrays forms a uniform bright area in the video detection position, effectively avoiding the dazzling phenomenon of ordinary exposure lights, minimizing the stimulation of human eyes, and overcoming the uneven exposure phenomenon and image tailing phenomenon of ordinary exposure lights on the camera.

Light body design is novel and unique, small size, light weight, strong adaptability, simple installation, easy adjustment, IP67 design, reliable waterproof, dustproof, shock-proof.

Application Scenario

Fengshang Optoelectronics FS-PSD-HP16 is a special monitoring lamp launched by our company, which uses high-brightness LED as the light source. This product has a reasonable structural design, a unique drive control method, uses imported high-power LED as the light source, and adopts excellent optical design to improve the utilization rate of light, providing professional fill light for video monitoring, vehicle and pedestrian target detection and capture. This product can be widely used in video synchronization fill light, high-definition road monitoring, electronic police red light running, security checkpoints, and speed measurement systems.

Dimensions

Note: FS-PSD-HP16 strobe fill light dimension drawing, unit: mm


图片.png


Technical Parameters

LED lamp model

CXBG-1-1-PS-A-FS-PSD-HP16

Trigger method

It can determine the synchronization signal (switch or level signal) of the camera output, and automatically match the camera work

Implementation Standards

GA/T 1202-2022

frequency

0Hz~250 Hz

Beam angle

10°/15°/20°/25°/40°Optional regular standard 20 degrees

Brightening snapshot function

Support camera capture fill light (suitable for old electric alarm bayonet renovation project, optional)

LED strobe power

Average power consumption ≤16W, peak power consumption ≥40W (actual power depends on the control mode)

LED flash power

Peak value > 240W, average ≤50W

Internal parameters are adjustable

RS485 (optional)

Effective fill light distance

16m~30m

Voltage

AC220V±20%,47Hz~63Hz

Color Temperature

2800-5500K

life span

≥50000H

Working temperature

Operating temperature -40℃~+80

Working environment humidity

Working humidity 10%~95%

Protection level

IP68

Dimensions (mm)

139*180*117mm(width, height, thickness)

Weight(KG)

2.2Kg

Response time

≤20us

Materials

Cast aluminum alloy, tempered glass

 


Wiring

Featured functions:


The same set of input signal lines are simplified into two, and the lamp automatically identifies the input signal (switching quantity or high or low level signal) and automatically matches, minus complicated wiring debugging work, and avoids various problems caused by wrong wiring.

Old electric alarm bayonet transformation: replace the original strobe light, normal strobe at night, brightening and filling light when the camera captures, in order to achieve the bayonet capture the driver's face requirements


图片.png


Wiring:


Three-core sheathed cable

Signal line
Note: All lines must be connected in pairs (line sequence color may vary depending on the production batch, please refer to the actual batch label)

Power cord (Must be well grounded)

Strobe signal

Strobe signal (optional)

485 lines (optional)

Brown: AC220V input L
Blue: Input N for AC220V
Yellow green: AC220V input PE

Red line: Stroboscopic +
Black line: stroboscopic -

Yellow line: Flash +
White line: Flash -

Brown line: RS-485_A
Blue line: RS-485_B


Note:


High pressure inside, non-professional personnel do not open.

Must be grounded reliably.

External force impact or fall easily lead to product leakage, thus damaging the flash.

Connect the cables correctly.

Application case

Other product recommendations