CXBG-1-1-PS-A-FS-3B-I
Model：FS-3B-I
Implementation standard: GA/T1202-2022 "General Technical Conditions for Traffic Technology Monitoring Imaging Fill Light Device"
Ecological fill light set LED strobe, LED flash and xenon white flash and infrared flash in one. LED stroboscopic and explosive flashing can be set respectively, xenon lamp flashing white during the day, switching to infrared mode at night, can shield the wrong trigger interference signal, automatically adjust the day and night brightness, energy saving and environmental protection, effectively reduce light pollution.
Flash day and night conversion: the flash supports two light modes conversion during the day and at night (white light is used during the day, infrared light is used at night)
Flash power: flash peak power is large, effectively improve the strong light suppression or in complex light environment to capture the face effect;
Longevity design: imported quartz lamp, high impact current resistance, long service life, ≥2000W times;
Imported components: The use of imported flash tube special capacitor, efficient charging and discharging module, high charging efficiency and long service life;
Fast flash: advanced fast charge and discharge path, short power return time, suitable for speeding capture, meet the requirements of fast capture;
Strong adaptability: automatically match the mainstream camera, support switch/level trigger; Support duty cycle protection, signal interference protection;
Anti-light pollution: The infrared flash at night effectively solves the night light pollution and reduces the safety risks caused by glare.
Protection function: When the frequency exceeds 9Hz triggers the flashing signal, the protection function is triggered, and the anomaly will return to normal after elimination;
LED strobe function:
The product adopts the digital control circuit design independently developed by the company, with automatic detection of camera frequency and exposure time, built-in algorithm automatically synchronizes (frequency doubling) camera frequency, exposure time can be controlled by the camera or manually;
PWM automatic follow trigger, with frequency and duty cycle protection function, automatically match the camera switching signal (rising, falling edge), level signal (high, low level);
LED selection of high color rendering makes the shooting picture color real. Synchronize with the camera shutter to achieve high-frequency instant highlighting, in the night without other ambient light, with high-definition cameras to capture clear license plates, the body, the driver in the car and the surrounding environment and other elements.
High protection level: the lamp body is simple to install, easy to adjust, IP66 design, reliable waterproof, dustproof, shock-proof;
Good internal heat dissipation design prevents the flash from overheating due to high-frequency flash damage
Does not contain harmful metal lead, mercury, green environmental protection.
FS-3B-I is a special bay flash specially designed for intelligent traffic capture. Through the control of high-definition smart camera, it synchronizes the fill light at the same time of capturing, and finally realizes the fill light function of high-definition smart camera capture. LED frequency (explosion) flash and gas explosion flash dual light sources are independently controlled to fill light, LED strobe supports PWM follow trigger, brightness is stepless and adjustable. It has the function of frequency and duty cycle protection, the gas explosion flash lamp supports the switch quantity trigger, supports the white light and infrared light conversion in the day and night, and has the anti-interference protection function;
Ecological fill light can effectively reduce the number of fill light required by the traditional bay, face forensics electric alarm system, anti-glare anti-light pollution, the use of special long-life imported quartz lamp, the life of more than 20 million times. It has the characteristics of long life, fast call back time and support for speeding continuous shooting, and can be directly installed in outdoor environment to avoid sparrow rod problems.
Note: FS-3B-I environmental protection flash size drawing, unit mm, size for reference only, subject to the actual
Lamp Model | CXBG-1-2-PS-A-FS-3B-I （CXBG-2-H/2-MC-A-FS-3B-I） | |
Implementation Standards | GA/T 1202-2022 | |
parameter name | Flash light parameter value | LED strobe light parameters |
voltage | AC176-264V，50/60Hz±3Hz | |
light source | Xenon lights | Imported high power LED chips |
Synchronous interface | 1-channel snapshot trigger input 1-channel strobe trigger input 1-channel infrared switching input 1-channel RS485 interface | |
Snapshot and fill light synchronization | Support capture and synchronized fill light function | Support PWM video synchronization |
Color temperature value（K） | 5500K±500K | 4500K |
Guide Number | (GN)：73 （ISO 100 1M） | / |
Dimming | Supports brightness adjustment in pulse mode (0.05ms～0.6ms adjustable), which can be adjusted through WEB page and RS485 debugging software | |
Maximum flash frequency | 16-17 Second-rate/s | 0-250HZ Adjustable |
Day and night switch | Supports light conversion between day and night modes (using white light to fill in the day and infrared light to fill in the night); | The LED is off during the day and automatically lights up at night |
Optical performance | At a distance of 20m from the visible light supplementary lighting device, the effective illuminance on the reference axis is <201x, and the average illuminance is ≤51x | |
Optical radiation | Comply with Class 0 hazard requirements specified in GB/T37958-2019 | |
Light sensitive control | Built-in photosensor control module, which can automatically switch between day/night mode by sensing the ambient brightness, adjust the brightness of the gas discharge pulse mode, and control the on and off of the LED strobe light | |
Response time | ≤20us (from the camera giving a signal to the flash reaching maximum brightness) | |
Call back time | ≤40ms | / |
wavelength | 750-900 nm | Visible light |
Effective fill light distance | 16m～25m | |
Light spot coverage | 1 lane | |
Light spot brightness | In the standard installation scenario, the surrounding environment, vehicle body features and facial features of the driver and passengers can be clearly seen | Meet the requirements of video detection environment fill light |
Trigger method | Dry contact trigger, meeting the trigger modes of most cameras on the market | Automatic detection of switch quantity and level quantity trigger |
Management Features | Support remote monitoring of the status of the fill light through the operation and maintenance management platform. It can display information such as fill light failure, normal status, device power-on times, flash trigger times, temperature real-time data, photosensitivity real-time data, flash time, etc. | |
RS458 interface | Support PC or camera connection (optional) | |
Working temperature | Working temperature -40℃～+70℃ | |
Working environment humidity | 5%～90%@40℃，No condensation | |
Suitable shooting conditions | Checkpoints and speeding shots, electronic police take photos of traffic violations | |
Protective function | It has intelligent lighting control system, over-frequency/overheat protection, automatic fault detection function, mis-contact intelligent protection and other protection functions. | |
Flash life | ≥2000 Ten thousand times | ≥50000 h |
Protection level | IP66 | |
product weight | 4.8kg | |
Product Size | φ269*438mm | |
Installation | Bracket installation | |
Dahua Camera:
Red and black lines: red + and black -, corresponding to the port flash (the detonation delay time is 0 by default for other parameters).
Yellow and white line: yellow "+" and white "-", corresponding to the port multi-in-one indicator (default)
Brown line RS485 A, blue line RS485 B, on-demand access; Green and orange lines do not need to be connected;
Three-core sheathed cable | Eight-core signal cable Note: All cables must be connected in pairs | ||
power cable | Gas flash signal | LED strobe and infrared conversion signal | 485 lines (access on demand) |
Brown: AC220V input L | Red line: Gas flash + | Yellow line: LED stroboscopic + | Brown line: RS-485_A |
Select "Flash" for the corresponding port in camera background, and the delay in scene mode is "0". | Select "Multi-in-one light" for the corresponding port in the background of the camera, and the brighter the digital headlight will be when the pulse width adjustment frequency sparkles 0.1 | ||
Hikang Camera:
Red and black lines: red + and black -, corresponding to the port selected flash (Effective status: High Level Default for other parameters).
Yellow and white lines: yellow "+" and white "-", corresponding to the port selection strobe light mode (or flash mode, active state "pulse" default state "High level")
Green and orange lines: green "+" orange "-", the corresponding port select "Switch line" mode or "Polarizer mode";
Do not connect the brown and blue wires.
Three-core sheathed cable | Eight-core signal cable Note: All cables must be connected in pairs | ||
power cable | Gas flash signal | LED strobe signal | Infrared switching signal |
Brown: AC220V input L Blue: AC220V input N Yellow-green: AC220V input PE | Red line: gas flash + Black line: gas flash - | Yellow line: LED strobe + White line: LED strobe - | Green line: Switch line + |
Select "Flash Mode" for the corresponding port in the background of the camera (select high level with active state) | Select "Strobe Light Mode" for the port corresponding to the camera background (or "Flash Mode" active state "Pulse" default "High level") | Select "Switch line mode" for the corresponding port of the camera background (some cameras select "Polarizer mode") | |
Note:
High pressure inside, non-professional personnel do not open.
Must be grounded reliably.
External force impact or fall easily lead to product leakage, thus damaging the flash.
Connect the cables correctly.
