Implementation standard: GA/T1202-2022 "General Technical Conditions for Traffic Technology Monitoring imaging Fill light Device".
Power self-check function: automatically judge the working state, and determine whether the camera output signal is normal through the number of flashes.
Support camera error trigger protection function, automatic protection and automatic recovery when trigger signal input is abnormal.
Wide voltage input automatic adaptation: Input different voltage lamps within the safe range can work normally, and will not cause the brightness of the lamp to change due to the voltage drop generated during the line transmission process.
Intelligent control: accurately control the brightness of the light source, can accurately control the stroboscopic pulse width, flash time, trigger signal and other parameters through the software setting function, through the field debugging, so that the camera can achieve the best shooting effect that ordinary lamps can not achieve.
Stroboscopic function: The product adopts the digital control circuit design independently developed by the company, with automatic detection of camera frequency and exposure time, built-in algorithm automatically synchronizes (frequency doubling) camera frequency, exposure time can be controlled by the camera or manually; Automatically intelligent matching camera switching signal (rising, falling edge), level signal (high, low level), the signal line is simplified into a group, intelligent identification camera output signal; LED selection of high color rendering makes the shooting picture color real. Synchronize with the camera shutter to achieve high-frequency instant highlighting, in the night without other ambient light, with high-definition cameras to capture clear license plates, the body, the driver in the car and the surrounding environment and other elements.
Anti-glare: the luminous body composed of multiple LED arrays forms a uniform bright area in the video detection position, effectively avoiding the dazzling phenomenon of ordinary fill light, minimizing the stimulation of human eyes, and overcoming the uneven exposure phenomenon and image tailing phenomenon of ordinary fill light on the camera.
Light body design is novel and unique, small size, light weight, strong adaptability, simple installation, easy adjustment, IP67 design, reliable waterproof, dustproof, shock-proof.
FS-PSD is a special monitoring luminaires with high brightness LED as the light source introduced by our company. The product has a reasonable structural design, unique drive control method, the use of imported high-power LED as the light source, the use of excellent optical design to improve the utilization of light, the product can be widely used in video synchronous fill light, high-definition road monitoring, electronic police red light running, bayonay system.
Note: Size drawing of FS-PSD stroboscopic fill light, unit mm
LED lamp model | CXBG-1-1-PS-A-FS-PSD |
Implementation Standards | GA/T 1202-2022 |
Power consumption | Average power consumption ≤16W, peak power consumption ≥40W (actual power depends on the control mode) |
Response time | ≤25us |
LED light source | Original imported high-power LED chips |
Number of lamp beads | 16 pieces |
Color Temperature | 2800K-6500K |
Color rendering index | ≥80% |
Beam angle | 10°/15°/20°/25°/40°Optional: Standard 20 degrees |
Strobe synchronization interface | Strobe synchronization trigger input (supports synchronous automatic frequency doubling) |
Optimal fill light distance | 16m~30m |
Trigger method | Can determine the synchronization signal (switch or level signal) output by the camera |
Management Features | Support remote monitoring of the status of the fill light through the operation and maintenance management platform. It can display information such as fill light failure, normal status, device power-on times, flash trigger times, temperature real-time data, photosensitivity real-time data, flash time, etc. |
Light spot coverage | The effective horizontal spot is 5 meters (installation height 6 meters, capture position 23 meters) |
Service life | >50000 H |
Protection level | IP68 |
working environment | Working temperature -40℃~85℃, working humidity 10%~90% |
Input voltage | AC 176V-264V |
Weight (Kg) | 2KG |
Product size (mm) | 139*212*69mm (width, height, thickness) |
Material | Cast aluminum alloy, tempered glass |
Featured functions:
The same set of input signal lines are simplified into two, and the lamp automatically identifies the input signal (switching quantity or high or low level signal) and automatically matches, minus complicated wiring debugging work, and avoids various problems caused by wrong wiring.
Three-core sheathed cable | Signal line Note: All wires must be connected in pairs (the wire sequence and color may vary depending on the production batch, please refer to the actual batch label) | ||
power cable | Strobe signal | Strobe signal (optional) | 485 lines (optional) |
Brown: AC220V input L Blue: AC220V input N Yellow-green: AC220V input PE | Red line: Stroboscopic + | Yellow line: Flashing + White line: Flashing - | Brown wire: RS-485_A Blue wire: RS-485_B |
Note:
High pressure inside, non-professional personnel do not open.
Must be grounded reliably.
External force impact or fall easily lead to product leakage, thus damaging the flash.
Connect the cables correctly.